GT Rope Access Limited Clients

Site: Merrill Lynch, Cheapside EC2 Contracted to mace Ref: Steve Burrows, Garrett Weir, Jim Trask. External Works: Techcrete UK Carry out all Natural stone repairs using various methods, each presented with method statements. Some operations include the use of electrical equipment, (cutting, spinning, drilling and power washers). All the above works undertaken are uniformed throughout every external elevation to a high finish. Some pre cast panels were cladded with red bricks these needed the above alterations as well as brick replacements generally due to discolouration damage or problems incurred during the manufacturing process. As a result interest was taken to the repointing of various panels to which a method statement covers each stage.
Spacetek: Ref/ Peter Bustin Carried out various curtain - walling operations. Both internal and external within the two main glass atriums. Assembly, installations, wet seals and general engineering specifications undertaken.
Connaught Cleaning PLC: Ref/ Dave Avears Having the only method of access at the moment in time, various cleaning projects were undertaken i.e. glass, stainless trims, powder coated soft panels, alloy braces, stonework internal and external finished to high standards.
T.Clark PLC: Ref Pat Jackson Installation of electrical light enhancement equipment mechanically fixed to steel supports within an expansive glass atrium, with operational office area below.
Swift Horseman: Ref Bob Sunnit/ Martin Voller Cleaning projects undertaken, to remove render from coping panels and other fittings. Install silicon sealants of various colours, tooled to agreed finishes. Install two meter lengths of powder coated capping panels throughout the South atrium.
Atlantic House, Farringdon Road, EC2 Contracted to Skanska Ref/ Roman Kirbybuk, Lee Stacey & Asgar Chouglay In coordination with Benwall Fixing Company Ref/ Sam, Ian, Chris & Steve Curtain Walling installation, replacement and remedial work undertaken using specialist access. With a constant liaison with Skanska and Benwall we combined skills and experience to address and overcome various problems throughout the building. Relevant method statements prided by G.T.ROPE ACCESS Ltd supported all operations undertaken. Using a team of abseil operatives equipped with two way radios and digital cameras we successfully carried out a process of de-glazing and glazing safely and efficiently without the use of a house cradle. With the use of a mobile cannon, seated on the house cradle track we attached a block and tackle, hooked onto a rechargeable power sucker, which enabled units to be raised and lowered, glazed or de-glazed. Banking and rope management skills ensured high and low level safety during all operations. This procedure enabled the glazing program to regain its target within a four-day period. Various sealant modifications were introduced and installed throughout the building, such as glass-to-glass units, horizontal and vertical joints to be tooled flush, not recessed as fitted. Part of our remedial package was to cut out meters of sealant and conpreband, then reinstall as instructed. During all sealant operations, sheets of cordex protection were used on all stonework, low-level canopies, paving stones and terrace flagstones then disposed of. With combined efforts from Benwalls, Skanska, Mace, and G.T.ROPE ACCESS Ltd, Atlantic House is without any further weathering problems!	Benwall Fixing Co Ltd
Faber Blinds : Chris Cosford / Chris Foley E.A.G Sealents / Northampton Install Corking and Sealants to internal glass atrium and commission all existing applications. Install and commission electric blinds within a glass atrium. Drill tap and fix to steel overhead box section steel using electrical tools and equipment.
Stuart Brown Partnership / Lovells / Gemma Chamen Dismantle and remove non commission electric blinds from horizontal glass roof.
Gormley Marble Specialists / Paul Keenan Carry out snagging as instructed on seven, thirty meter granite columns. Location Triton Square.	Gormley Marble Specialists Ltd
Mace / Geff Charlotte Dismantle and de-rig internal (façade hoist ) house Cradle using industrial rope access equipment.
Benwall Fixings/ Barry Bennet/ Portugal Street WC2 Install external facade panels using rope access and various rigging techniques. All work catalogued on digital imaging equipment, and emailed as requested.	Benwall Fixing Co Ltd
Stuart Brown Partnership / Lovells/ Alan Clarke Contract Glass Cleaning, Sealant Applications, Snag and Repair Armour coated plaster.
Ellmer Construction Assist in Rigging and transporting heavy duty lifting equipment to and from various levels within a 50 meter high glass atrium.
Atlantic House EC2 Armour Coated Plaster LTD - Commission polished Plaster in main entrance of lovells main building using industrial Rope Access.
Phoenix Electricals/ Phil Nelson Carry out maintenance repairs and commission internal & external lighting equipment.
Angela Conner / Fellow of the Royal Society of British Sculptors Over a period of six months, our team work has made it possible to install Europe's tallest indoor water themed sculpture at Lovells in London. GT has had a high level of involvement to all planning, organization and operations undertaken to this package: Extensive Rigging Lifting of equipment & materials using pulley systems. Installing house cradles for welding equipment and operatives. Load Testing each part of the sculpture as it is erected using lead weights and recording each alteration made. Carry out cutting, grinding and fabrication welding. Using tools & equipment and assemble all fittings and components. All the above works were completed using Industrial Rope Access.	Royal British Society of Sculptors
Ministry Of Defense Buildings / Richard Belamy / Mike Stride / Phil Cooper Skanska Rashliegh Weatherfoil Ltd/ Electrical & Mechanical Engineering Carry out various maintenance projects to the following buildings: Number 1 Northumberland house WC2 St Giles Court WC1 Main building development Whitehall SW1 War Office SW1 Operations involved: Pest control / Installation of netting and removal of pest waste All repairs, maintenance and clearance to pitched roofs, flashing and guttering All inspections are documented with Digital Enhancement Equipment.
ST Giles Court ST Giles Circus WC2 & LD Remedial works to external window units Carry out reinforcement with stabilizer to each window unit and remove all instable concrete, brickwork and rebar Patch repair and apply slurry coating uniform throughout Remove corroded rebar / core drill / stainless dowels and chem-fix various areas A complete photographic data report and elevation drawings supplied on completion A 3 Month Project
JOSEF GARTNER AND CO LTD Jamie Ross, David Morgan. London E14 9UB Tower Place, Tower Hill London EC3 Create Access and install specific panels of stone to levels 1-5 around Waagner Biro Cables Penetration on East Building. Fit external facade trims and Bree-Soleils as instructed By Jamie Ross. Install Hauling systems all supported by method statement and risk assessments.
Skanska UK Build Contract: Roman Kirycuk Swiss Re / Baltic Exchange Redevelopment ST Mary's Axe London EC2 Swift Horsman / Dave Kelly Lightweight Plastering / Ron Meadwell Install various Rope Systems within two riser shafts from levels 36 to 1 using Irata Confined Space Guidelines Scope of Work Installation of Rockwool and fire retardant sealant products to internal service hatches Carry out numerous dry walling repairs and commission all internal installations
Pearce Group LTD Contact: Paul Dean, David Mortimer Travel INN Pearce Leisure Royal Victoria Dock London E16 2BU Using Specialist Rigging Equipment we successfully installed a selection of coloured sealants from levels 6 to Ground
Haymills Contractors Contact: JOE Breckon Science Museum Queensgate London SW7 Carry out various sealant applications over a 5 week period until completion All areas smoke tested to 0.9 Pascals / m²
Skanska UK Build Swiss Re St Mary's Axe London EC2 Baltic Exchange Redevelopment. Contact: Asgar Chouglay Create Access in each set of six pack atrium areas situated on levels 4-10, 15-21 and 22-27, plus various two story atria around the building. Install three types of stainless steel bolt-on and clip assembly fixings to atrea beams and bow tie levels. Each fixing to be installed as instructed by street crane express A total of 1700 components to be fitted as part Program to install an Internal mobile access rigging system over a 5 week period.
AWS Commercial windows limited Contact Robin Depper Bryer Group Plc Contact: Carl Abrahams and Jamie Ross Winter Garden House Mackin Street London WC2 Create roof top access and carry out removal of various glazed sash units. Commission reinstall, and install various sealant applications
Fireclad Limited Contact David Flynn and Paul Mc-Quin Time Square Project Blackfriars Queen Victoria Street EC4 Mace Project. Reference Steve Burrows Install various rigging and haulage systems in four dry riser shafts, each 7 levels high with door opening on each level. Mechanically fit, brackets, steel lanyards and adjustable solid weight systems to ensure doors remain closed throughout extensive fire testing.
Skanska Build UK Swiss Re St Marys Axe EC2 Contact Asgar Chouglay and Decklan Gormley Create access to 24 static portable cabins stacked four high. Install a master system fishing eye bolts each linked with kermantle ropes providing a working perimeter safety line. Using various spanners, sockets and wrenches remove all bolts, brackets and side panels to each cabin. Sling removed materials on lower to ground level using pulley system and GT Banksmen
Hindwoods Hunter Payne Limited, Chartered Surveyor Syndenham High Street Contact Chris Withersgreen and Richard Bellamy Carry out monumental stone restoration, re-pointing, brick replacements, acid cleaning, water proof render applications and various guttering modifications. Restore concrete moldings and terracotta detail.
Skanska Build UK Swiss Re Building 30 St Mary Axe London EC1 Manager Asgar Chouglay An abseil project requiring a team of five technicians for a four month period Project supervised by Health and Safety Executive Toney Northcott Three day in house inspection of equipment, certifications, textile testing records, company liability insurance policies, IRATA certifications, method statements, risk assessments, cosh reports, company registered certifications and a full environmental registration documents approved by LOLER, IRATA and Skanska all provided at a high standard by GT Rope Access Limited Task / Install two piece, custom made, stainless steel rope access anchor points to each internal atria bow tie and dog leg attachment point throughout every one – six fingers within two pack and six pack atria levels uniformed from level one to thirty eight Access created from OCS trolley track systems and advanced rigging Rescue, access, and haulage systems created daily to ensure safety and provide a professional service working at a methodical rate Components installed were tagged as installation requirements
Skanska Build UK Swiss Re Building Asgar Chouglay Ian Perry Sandbergs Engineering James Kern Tony Pitman A rope access project requiring a team of five technicians for a five month period Carry out load testing to each and every abseil attachment anchor point listed above and to include all side traversing trolley rail systems built into each two pack and six pack upper floor Lifting equipment consisting of turfors, long chain block and tackles, shackles, material slings, pallet trucks and custom made parapet lifting and access platforms Sandbergs Engineering responsible for supervising and monitoring the testing
Benwall Fixings Ltd Charter House, Faringdon Rd, London Barry Bennett Rope access sealant application	Benwall Fixing Co Ltd
JOSEF GARTNER AND CO LTD Tower Place, London Jaimie Ross, David Morgan *Gain access to underside of external canopy* *Create hauling system to install 50kg natural stone panels around Wagner Biro’s penetrating cables from levels 1 – 5 on east building*
UBS Warburgs Finsbury Avenue London EC2 Brian Scott *Create access to ceiling of main entrance hall* *Electrical work to commission overhead hi-spec mood lighting units*
Lightweight Plastering Swiss Re Building 30 St Mary Axe Tom Burke Access to confined space riser shafts by rope access Install fire retardant dry lining and fire stopper applications Dry lining repairs.
Haymills Contractors Ltd Shaun Bongard Science Museum, Southgate, W7 Carry out sealant applications and mortar pointing, air testing General making good of external stonework by rope access
Pearce Leisure PLC Greg Lake Travelodge, Excel East, Victoria Dock, London E16 Install caulking and various sealant products
Lovell’s / Stuart Brown Alan Clarke Install hauling systems within internal atria to raise materials from ground level to levels 1 -14
Skanska Build UK Roman Kirycuk Swiss Re Building Swift Horsman Jim McLelland Lightweight Plastering Ron Meadwell Confined spaces within central riser shafts from ground – level 37 by rope access Install sealants to access hatches at each floor level Provide follow-up photographic inspection
AWS Ltd Robin Depper Winter Garden, London WC2 Carry out inspection of rooftop anchor point Carry out removal of various sash windows then replace with double glazed window units Install external sealant applications then apply external UPVC glazing strips
Fireclad David Flynn Time Square Project, Queen Victoria St, Blackfriars, London EC4 Confined spaces within riser shafts Install internal door brackets with steel cable lanyards attached to weights to ensure each riser door closes correctly to meet fire regulations
Swiss Re Building Skanska Build UK Declan Gormley Use industrial rope access to dismantle brackets and fixings from three portable in-site cabins stacked 25m high
Swiss Re Building Schmidlin UK Ian Gurney Access 2 pack and 6 pack atria using OCS person rider system Install M10 tapped bolts and sprung washers and torque set each one System tested and certified
Skanska Rashleigh Weatherfoil Ltd Electrical and Mechanical Engineering M.O.D. Building, No 1 Old War Office, Whitehall SW1 Carry out survey to listed external elevations within rectangular and triangular light wells in need of redecoration Provide written report
Skanska Rashleigh Weatherfoil Ltd Northumberland House, London, WC1 Mike Stride Carry out repairs to concrete canopies throughout external façade Apply waterproofing products
Swiss Re Building Asgar Chouglay Install temporary marine-ply weatherboarding to missing window units on various levels throughout the building to make weather tight.
Fireclad Ltd Mark Skinner Mace Projects Steve Burrows RBS, London EC1 Carry out a complete written and photographic inspection of riser shafts and air conditioning systems from ground to roof levels
Swiss Re Building Skanska Build UK Paul Thorogood Carry out re-testing to dog leg suspension points and bow tie plates using 4 x 250kg weights Create hauling system to lift testing equipment into position in atria Testing certificated by Sandbergs Engineering
Swiss Re Building London Engineering Ltd Pat Curran Carry out alterations to fire blanket and plasterboard to six cooling towers on level 37 Reinstall metal trims using Tec screws
Swiss Re Building Skanska Build UK Roman Kirycuk Use hydraulic access equipment to carry out electrical alterations to main entrance overhead lighting panels
Skanska Build UK Asgar Chougly Bury St Building, London EC3 Carry out sealant applications to flame textured granite panels, tool finish and uniform throughout building
Swiss Re Building Skanska Rashleigh Weatherfoil Paul Peck Using OCS person-rider system install lighting units throughout each 2 pack and 6 pack atria Replace and commission all faulty electrical components as instructed by Paul Peck
Skanska Build UK Paul Thorogood Valliant House London EC3 Glass cleaning project – 7 floors, 3 elevations
Laxcon Construction Ltd Sam Assani Penthouse Apartments, Whitechapel London EC2 Carry out paint applications to external textured render using Webber silicone enhanced acrylic paint
AESA UK Ltd Access Cradles Ltd Gerald Gartner Radisson SAS Hotel, Stanstead Airport Carry out mechanical installation of person-rider system accessed by hydraulic scissor lift Use advanced rope access aid climbing techniques to install corner brackets
Stonewest Ltd Steve Warren Marriot Hotel, London W1 Cut out existing external sealant from vertical joints between natural stone panels Re-install caulking and apply various sealant products. Tool finish to specification
Skanska UK Build Paul Thorogood Valliant House EC3 Using rope access techniques and hauling systems deglaze window units from level 3 and install new units to specification
Skanska Build UK Ian Perry, Kevin O’Shea, Gary Lucas Radisson SAS Hotel, Stansted Airport Using internal atria person rider system to redecorate high level steelwork Carry out lighting installations for Peter Ronsford, Peter Burns and Bill Darling
Tubular Erectors Ltd Radisson SAS Hotel Andy Scott Supply five person rope access team to remove corrosion and spot welds from front screen steelwork, ground – level 4 Carry out preparation for and application of three coats of white cellulose paint Apply sealant applications to armour coated internal render
Swiss Re Building Coflex ISS Facilities Services Ltd Angelyn Balleza Carry out the removal of all fluorescent light units within 2 pack and 6 pack atrias on each level and replace with alternative coloured tubes
AESA Ltd Access Cradles Gerald Gartner Radisson SAS Hotel, Stansted Airport Aid-climb to each corner of the person rider system and install steel stabilizing struts to reduce deflection
Radisson SAS Hotel, Stansted Airport Jim Bailey Set up and adjust ten projection lighting units with GOBO texture slides under supervision of Colin Ball
Gratte Brothers Ltd Warren Bradshaw Radisson SAS Hotel, Stansted Airport Install high rig stage lighting to internal atria perimeter Carryout final adjustments to laser smoke detector system
Gormley Masonry Services Ltd London NW10 Ken Pine Lion Plaza White and Case Building Old Broad Street EC1 Apply monumental stone repairs to natural stone cladded main entrance and internal walls , ground to level two Works undertaken within a fully occupied forty meter internal atria Using rope access and experienced masonry technicians install all hard pointing stone to stone and sealant applications stone to steel work Work completed in time for clients Christmas party 2004	Gormley Marble Specialists Ltd
Jones Lang LaSalle Marcus Cain London EC2 Regular Cleaning Services Limited Barry Herbet London SE 13 Lion Plaza Old Broad Street London EC1 Build clean project within a fully occupied internal atria Working along side Amex building management and Fujitec lift engineers to carryout a program of access without disruption to building occupants and there clients Access created from the installation of three pairs of elephant trolley plates fitted to house cradle perimeter eye beam track by GT Rope Access Ltd Project included maintained to high level louvers / bre solays, vacuum hovering all recessed integral grid designed perimeter steel work using back pack pneumatic hoovers, snagging of sealant applications, cleaning of glass lift cars, perimeter glass, balustrades, stone work, steels, lighting units, lift pits and internal glass canopy all accessed using rope access skills A regular maintained contract 2004 onwards
White and Case Carla Winchester Lion Plaza Old Broad Street London EC1 Using rope access to create unique work positioning to enable the installation of defused film / manifestation to various internal glass units throughout the building
Humbro Roofing Limited London EC3 Steven Humbro Lloyds Register Building London Gwy Williams Supply a team of abseil technicians to remove building material spillages from high level external powder coated alloy cladding panels and make good using products supplied
Schmidlin UK Ian Cameron Skanska UK Peter Pontsford Coflex Ritchard Stead Robin Dinmore Swiss Re Building Gherkin April 2005 A bottom hung triangular unit of glass fell 120 meters (400 feet) to the ground plaza without injuring any persons GT Rope Access Ltd was requested to supply a ten person team of rope technicians stabilize window units as instructed by Schmidlin All involved carried out the project in a professional manner avoiding press and reporters and not commenting to tabloid papers throughout the incident. The project required the removal of left and right handed electrical motors powering the opening and closing of all bottom hung window units installed in each two pack and six pack location throughout the building Motors were examined tagged and parceled for shipping back to the manufacturers for commissioning / redesign. Motor units were later returned and installed by Schmidlin UK Following our project completion the GT team were commended for our efforts and rewarded with drinks and canopies courtesy Coflex management
Hindwoods Hunter Payne (Chartered surveyors) Colin Elliot Dulwich High Street SE London Install cable ways and b lay rope systems to access a lightning damaged spire and steeple situated on a slatted roof Remove damaged turret complete, rebuild to as specified Carryout led work and roofing repair Commission lighting conductor cables and brackets
Skanska UK Build Palestra Building Southwark SE London Gary Clifford (Project Director) Industrial window cleaning project Use roof level overhead structural steelwork to multi- Use rope access on three complete elevations to complete build clean Policed
Skanska UK Build Radisson SAS Hotel Stansted Airport William Brock (Project Director) Martin Harris (Senior Suveyor) Redecoration project using rope access Using ICI specialist paint products, re-paint a prestigious centre piece lift core positioned in the main entrance internal atria All applications to be uniformed Added protection to white marble floors and precautions whilst working within a occupied environment
R & S Fire and Security Limited John Allsop / Duncan Ross Mace Solutions Limited Geof Charlotte / Simon Hudson British Airways Project Terminal 5 Heathrow Airport *Project Location & Task* *Fire Sealing the Compartment Wall between the Goods Hoists and the Fire mans Lift* Heathrow Airport, Terminal 5, Building A, Compound C. Basement 1 Apron Level Arrivals Level Gate Seating Level Departures level Mezzanine Level Fireman’s Lift Shafts: L100 L97 L90 L89 L85 L83. Goods Lift Shafts: L98 L96 L91L88 L84 L82. GT Rope Access Limited will be a sub contractor to R & S Fire & Security. Provide two industrial rope access teams each consisting of five IRATA registered operatives each equip with full PPE, equipment and knowledge of project. An IRATA level 3 operative shall work in each team to ensure maximum safety and productivity. Each working pair shall be policed at all times by a multifunctional third team member. This team configuration provides a project liaison representative responsible for keeping the project on program and problem solving till completion. An on site policeman ensures the entire work zone is safe and protects all other working operatives along with preparation of all tools, materials and equipment daily. Two operatives constantly working from ropes, third rigging, de-rigging, attaching materials, tools, equipment, to working ropes on all levels to maintain productivity. IRATA ID membership cards and company multimedia profile package will be presented before project commences. All access equipment, skill cards, and GT insurances to be supplied by GT ROPE ACCESS LTD prior project commencement. In addition all drawings, monitored progress sheets and priority progress reports shall be collated and supplied on completion. The entire project GT0101 will be photographed and stored on disc for client viewing. Following our meeting on site with Geoff Charlotte of Mace Solutions Tuesday 3rd August 2005 GT provides alternative access solutions. GT0101 project shall be undertaken without any ground level disruption, resulting in zero client/building inconvenience. As agreed this project can only be undertaken during weekdays between the hours of 6am to 6pm. Installation works to be carried out at a methodical pace whilst handling new materials and power tools, productivity to increase following resourceful problem solving and experience gained. Create access within two lift shafts each day, (ropes to be deviated to provide optimal work positioning) use electrical tools provided by RNS for example: Side winder drills Dry wall screw guns Tek guns (A HILTI DX ticket required to operate this equipment) Shot fire fixing guns All power tools sourced by 110 volts and certificated Reciprocating saw Grinders and cutting tools (hot works certificates and permits supplied) Task lighting and Harris fencing to be installed and customised by a Mace Solutions labour team daily. Materials chosen to be installed are: Expanding foam Corking and sealants Hessian/Normex material fire retardant blanket Reeled fine metal sewing cable (to stitch and secure blanket material) Screws, brackets, angle trims etc Install fire retardant products to a total of 12 lift shafts using industrial rope access. All products used shall have supporting data sheets. Coshh report will be attached to Risk Assessment and Method statement. Communication during the project is possible using 2 way radio systems. Industrial rope haulage systems shall be created and installed to rise and lower materials and equipment when operative is in a working position. Protection to all finished surfaces must be installed prior to access and blue shoe covers to be worn if requested. All tools used shall be fastened to the working harness via lanyards. Exclusion zones shall be installed using hazard signs, Harris fencing and scope of work notices supplied by GT. GT will contribute skills, equipment and experience to ensure the project is completed safely and efficiently. Method statement & risk assessment supplied by GT Rope Access Limited. A complete photographic data report can be provided on completion or each phase.
Omega Red Group Limited Patrick Fairman QS Travel Lodge Hotel 116 High Holborn Paul Icessan Project Manager West London Installation of insulated alloy lightning cable track on various vertical elevations Where necessary fit cross over plates and earth tags Visually inspect latch way system Build roof rigs and back up access systems to concrete structural columns Provide advanced deviation systems and rope protection Project completed thanks to Martin the steeple jack / experienced IRATA qualified rope access technician
PIP Electrics Limited Jim Ward / Bob Moore Fenton House Southfields Business Park Basildon Essex SS15 6TD United Kingdom Broadgate West Building Phase 2 1 Snowdon Street London EC2A 2AP United Kingdom To dismantle louver unit rotate 180 degrees and re install using tools supplied and rope access multiple rigging points backed up to structural anchor points tested at 20 tons, providing precise rope access working positioning. Ensure equipment is inspected and installed correctly. Provide a safe policed working zone Carryout the task at a methodical pace with full knowledge of risk and task. Industrial rope haulage systems were created and installed to raise and lower materials and equipment when the abseil technician is in a working position. GT shall supply all certifications and insurances on request. All tools used shall be fastened to the working harness via lanyards. Ground level zones shall be policed during any access operation. On request exclusion zones shall be installed using hazard signs, warning tape and scope of work notices supplied by GT.
Gerald Gardner (General Manager) AESA UK Limited 104 Maltings Place 169 Tower Bridge Road London SE1 3LJ Radissons SAS Hotel London Airport Waltham Close Stansted Airport Essex CM24 1PP United Kingdom Carryout a visual and textile examination to all bolted attachment points fitted to the perimeter person rider bracket plates. Fit Nyloc nuts where necessary using a ratchet spanner, tighten each spacer nut to all relevant basketry. With the above works completed the continuity of the rider system fabrications will ensure a noticeable reduction in deflection / movement. Inside the wine tower load test the four motorised trapezes systems using 5 x 25 kg weights and 35kg tray, total 160kg tests, each test was monitored from within the tower cap and from ground level. GT recommend a metallurgist engineer (SANDBERGS) examine the fabrication of the person rider system if deflection continues. Haulage systems shall be installed and all material objects raised and lowered using tailored slings.
Patrick Fairman / Chris Hopson Omega Red Group Limited Unit 10 Prospect Way Hutton Industrial Estate Brentwood Essex CM13 1XA Kings College London WC2 2HH Set up advanced rigging systems for GT technicians and Omega personnel. Install lightning tapes as advised by Omega Supervisor David Reed. Assist in daily progress meetings with Craig Eccleston of Meica, Paul Whip and Rodger Johnston of Bovis daily.
Tim Cordon (General Manager) Simon Pearson (Chief Engineer) Radisson SAS Hotel London Stansted Airport Waltham Cross Essex CM24 IPP United Kingdom Radissons SAS Hotel London Stansted Airport Waltham Close Essex CM24 1PP To create access to internal atria roof top tracking system (rail and roller plates to be tagged and certificated prior to project commencement ) from level 4 link bridge using industrial rope access methods. Use trolley rail to traverse into suitable working positions, any further rigging will require 2 separate structural points of attachment. Clean internal glass of wine tower. Remove each high level ventilation grill and vacuum internal filter and visible grills uniform throughout atria. Vacuum all steelwork and ledges accessible from the internal person rider system. On request commission all internal atria lighting systems. In the case of an urgent requirement for abseil access GT Rope Access Limited will guarantee a same day response. Industrial rope haulage systems shall be created and installed to raise and lower materials and equipment when the abseil technician is in a working position. Protection to all finished surfaces must be installed prior to project commencement and blue shoe covers to be worn at all times to prevent damage to painted surfaces.
Schneider (GB) Ltd 49 Wilkins House Churchill Gardens London SW1V 3BY Schneider (GB) Stratford Eye Project Wates C.L Oxford Road Stratford London E15 1BJ Set up advanced rigging systems to concrete pillars situated above each working location on zones A and K. Install horizontal gaskets and retaining clips on units at Grid T3/A and Grid T3/K. Survey gasket at base of units and take photographic evidence to show correct seating of gasket from ground level to level 14. This procedure will repeat on all levels.
Craig Blake Skanska Facilities Services Room 91.1.04 M.O.D. Head Office Whitehall London SW1A 2EU M.O.D. Main Building Whitehall SW1A 2EU Remove debris / foliage from each gulley opening, remove stones on zones B D F I K M carryout a visual and textile examination of the surface membrane identify any damage and carryout appropriate repairs. All tools and materials will be placed in GT lock neck material pod bags whilst working at heights. To maximize on productivity and minimize on any disruption to clients the entire project will be policed at all times by each IRATA trained technician.
Tim Cordon (General Manager) Simon Pearson (Chief Engineer) Radisson SAS Hotel London Stansted Airport Waltham Cross Essex CM24 IPP United Kingdom To create access from external roof top level using two alloy roof rigg kits backed up to latch way anchorage system. All equipment is lightweight and transportable. Each rigg shall be assembled on a sheet of protective material and marine plywood to protect roof surface. A demonstration of the use of the equipment and sample of the high quality clean was displayed on two elevations Wednesday 11^th October 2006 to John Lassaso and Simon Pearson, a bench mark standard to be uniformed on each elevation. Three rope technicians and two abseil roof riggs shall target fourteen drops per working day, each drop approximately 1.8 metre wide reach. Industrial rope haulage systems shall be created and installed to raise and lower materials and equipment when the abseil technician is in a working position. Protection to all finished surfaces must be installed prior to project commencement and blue shoe covers to be worn at all times to prevent damage to painted surfaces. A complete photographic data report can be provided on completion.
Craig Blake / Babara Baynes Skanska Facilities Services Room 91.1.04 M.O.D. Head Office Whitehall London SW1A 2EU UK M.O.D. Main Building 10 Horsgards Avenue. Ensure each technician is constantly attached to the certificated Sala latch way system or certificated anchor bolts installed. Rigg a set of low stretch working rope to allow a technician to descend to the building edge drain pipes. Remove debris / foliage from gulley openings and drainage systems and carryout appropriate repairs if required. GT will contribute skills, equipment and experience to ensure the project is completed safely and efficiently.
Graham Handley (Project Manager) AESA UK Limited 104 Maltings Place 169 Tower Bridge Road London SE1 3LJ Radissons SAS Hotel London Airport Waltham Close Stansted Airport Essex CM24 1PP United Kingdom Naracon Monorail Internal Trolley System Using industrial rope access equipment and advanced rigging systems connect a GT operative to the internal perimeter person rider trolley rail. Throughout the project a second GT operative shall police ground level if requested install cordons and signage. Carryout a visual and textile examination to each bolted attachment point to perimeter person rider bracket plate system installed. With works carried out 2006 the continuity of the rider system fabrications has shown a noticeable reduction in deflection. Load test carried out to 190KG with 150KG weights, 35KG basket and 6KG block tackle. System satisfactory, read advisory notes made on GT0112 and GT0118 documents. Naraco External Box Ladder System Loaded system with a distributed total weight of 330KG. The low level buffer rail requires remedial repairs in six allocated areas; unfortunately due to adverse weather conditions these works remain incomplete. NOTE GT advised that an internal collar be fitted between each unsupported buffer rail end using a drill and pot rivet method. The above mechanical fixing will ensure the system maintains its continuity and prevent any further distortion damage. All works carried out at a methodical pace in awareness of person safety.
Charles Cooper Eye Pro Limited Hollywood House 76 Hollywood Lane Rochester Kent ME3 8AR Weymouth Court, Weymouth Street, London W1 Set up advanced rigging and pulley systems for GT technicians. Carryout installation of 72 chimney cowlings as instructed by IPRO supervisor. Supply IPRO with digital images on project completion. All tools and materials will be placed in GT lock neck material pod bags whilst working at heights. To maximize on productivity and minimize on any disruption to clients the entire project will be policed at all times by each IRATA trained technician. Exclusion zones can be installed on request, using hazard signage and warning tape.
Paul Flynn N.D.M Limited Lead Sheet Specialists Metallum House 3 Innovation Park Manor Farm Road Alperton Wembley Middlesex HA0 1XE Kings College London WC2 2HH Facing Thames River Set up advanced rigging systems for GT technicians. Carryout lead work repairs in two locations as advised by N.D.M Supervisor. Supply Bovis with digital images on project completion. All tools and materials will be placed in GT lock neck material pod bags whilst working at heights.
Craig Blake Skanska Facilities Services Room 91.1.04 M.O.D. Head Office Whitehall London SW1A 2EU UK M.O.D. Old War Office Horseguards Avenue Whitehall London SW1A 2EU Roof top-level, light well East side. Remove existing debris netting from cargo mesh and separate carefully from rigged metal cabling. Waste mesh to be bagged and disposed of by GT Rope Access Limited. All tools and materials will be placed in GT lock neck material pod bags whilst working at heights. GT expects there to be various dates and events on the British calendar which may result in you the client providing a flexible program of works throughout this task.
James Powell (Project Engineer) Dawn Wootton (Accounts) Imperial Ductwork Services Limited Marlowe House Ground Floor Suite 109 Station Road Sidcup Kent DA15 7ET Mace Project Beddington Farm Road Croydon London To access rigging areas using scissor lift, connect to latch way systems. Set up advanced rigging and pulley systems for GT technicians. Carryout assembly of duct units and install as instructed by I.D.S. L Supervisor. Supply Mace with digital images on project completion. All tools and materials will be placed in GT lock neck material pod bags whilst working at heights. To maximize on productivity and minimize on any disruption to clients the entire project will be policed at all times by each IRATA trained technician.	Imperial Ductwork Services Limited
Patrick Fairman Omega Red Group Ltd Dabell Avenue Blenheim Industrial Estate Bulwell Nottingham NG6 8WA UK Kings College London WC2 2HH End elevation / facing Thames River To access rigging areas using internal passenger lifts and external stair well. Set up advanced rigging systems for GT technicians. Carryout the removal and re-installation of two metal cowlings. Supply Meica, Bovis and Alan Gibbs (Kings College) with digital images on project completion.
James Ballie Director Technical Development Park Hotels Management Limited Chicago Avenue Manchester M90 3RA United Kingdom Park Inn Hotel St Mary’s Street Bedford Bedfordshire MK42 0AR Front Elevation Rear Elevation Duck Mill Lane Elevation and Riverside Elevation. To access above areas using internal passenger lifts and stair wells. Install mobile alloy roof rigs and back up each to structural points. Carryout a hammer test to each concrete panel on all elevations removing any loose concrete (all tools and materials are placed in GT lock neck material pod bags whilst working at heights) and collate material findings. Drill sample tests and phenolphthalein tests have been undertaken and results are catalogued in the survey report. A bound copy of the survey report has been posted to James Baillie at 79 Ravelston Dykes Road Edinburgh EH4 3NU . Included in the survey report package is a memory key containing a PDF format of the photographic report and a word document folder containing helpful information to assist in summarising the current building condition. To maximize on productivity and minimize on any disruption to clients the entire project has been policed at all times by each IRATA trained technician. GT has contributed skills, equipment and experience to ensure this project has been completed safely and efficiently. Method statement & risk assessment supplied by GT Rope Access Limited.
Craig Blake / Barbara Baynes Skanska Facilities Services M.O.D. Head Office Whitehall London SW1A 2EU M.O.D. Main Building Whitehall SW1A 2EU Ensure each technician is constantly attached to a certificated Sala latch way system, certificated anchor bolts or ensure a safe connection from the working harness lanyard. Once in the work zone rigg a friction pulley system attached to overhead structural steel work using plastic coated bomb proof steel strops. Using material slings connect to air conditioning compressor unit, lift and lower to ground level, repeat procedure and ascend replacement unit to level five installation points. Ensures compressor unit does not invert, keep upright. All tools and materials will be placed in GT lock neck material pod bags whilst working at heights.
Craig Blake / Barbara Baynes Skanska Facilities Services M.O.D. Head Office Whitehall London SW1A 2EU M.O.D. Main Building Whitehall SW1A 2EU Ensure each technician is constantly attached to a certificated Sala latch way system whilst rigging to eye beams, install rope protectors where necessary. Remove caps and gulley filters, clear all debris and foliage from drain system and carryout water test. Document results in a follow up report. All tools and materials will be placed in GT lock neck material pod bags whilst working at heights.
Tim Cordon (General Manager) Simon Pearson (Chief Engineer) Radisson SAS Hotel London Stansted Airport Waltham Cross Essex CM24 IPP United Kingdom Radissons SAS Hotel London Stansted Airport Waltham Close Essex CM24 1PP United Kingdom To create access to internal atria roof top tracking system (rail and roller plates to be tagged and certificated prior to project commencement ) from level 4 link bridge using industrial rope access methods. Use trolley rail to traverse into suitable working positions, any further rigging will require 2 separate structural points of attachment. Clean internal glass of wine tower. Remove each high level ventilation grill and vacuum internal filter and visible grills uniform throughout atria. Vacuum all steelwork and ledges accessible from the internal person rider system. On request commission all internal atria lighting systems. In the case of an urgent requirement for abseil access GT Rope Access Limited will guarantee a same day response. Industrial rope haulage systems shall be created and installed to raise and lower materials and equipment when the abseil technician is in a working position. Protection to all finished surfaces must be installed prior to project commencement and blue shoe covers to be worn at all times to prevent damage to painted surfaces. GT shall supply all certifications and insurances on request. All tools used shall be fastened to the working harness via lanyards. Ground level zones shall be policed during any access operation. On request exclusion zones shall be installed using hazard signs, warning tape and scope of work notices supplied by GT.
Charles Cooper Eye Pro Limited Hollywood House 76 Hollywood Lane Rochester Kent ME3 8AR Weymouth Court, Weymouth Street , London W1 To access rigging areas using internal stairwell and loft opening. Connect to latch way systems before accessing roof top. Set up advanced rigging and pulley systems for GT technicians. Working with IPRO rig working ropes to elevation 4. Carryout refurbishment works to level one cornis using rope access and a portable mobile tower. Hammer test the rendered underside, remove any loose debris, expose steel work and grind back to clean metal, apply a suitable zinc paint product and uniform stone repairs using Portland repair mix. Supply IPRO with digital images and progress reports throughout the project. All tools and materials will be placed in GT lock neck material pod bags whilst working at heights. Method statement & risk assessment supplied by GT Rope Access Limited.
Craig Blake / Barbara Baynes / Judy Billing Skanska Rashleigh Weatherfoil West Byfleet Surrey KT14 6NG M.O.D. Main Building Whitehall SW1A 2EU Internal works, chiller plant room. Sign in at main entrance with requested I D. To access above areas using internal passenger lifts and stair wells, each technician has LDN security pass. To be escorted by a Skanska facilities engineer daily. Use gantry to access working level, aid climb carefully across pipe work using material slings attached to lanyards from the working harness, install rope protectors where necessary. Ensure power source has been turned off.. When In position replace Siemens sensor fitted to flow header. Remain on site until system is tested and operational. A complete photographic data report can be provided on completion.
Graham Handley (Project Manager) AESA UK Limited 104 Maltings Place 169 Tower Bridge Road London SE1 3LJ Radissons SAS Hotel London Airport Waltham Close Stansted Airport Essex CM24 1PP United Kingdom Naracon Monorail Internal Trolley System Using industrial rope access equipment and advanced rigging systems connect a GT operative to the internal perimeter person rider trolley rail. Throughout the project a second GT operative shall police ground level if requested install cordons and signage. Carryout a visual and textile examination to each bolted attachment point to perimeter person rider bracket plate system installed. With works carried out 2006 the continuity of the rider system fabrications has shown a noticeable reduction in deflection. Each bracket has six bolted fixings, a total of 216 fixings were tested and 3 were tightened. No deflection was visible and end stops were in good order. Naraco External Box Ladder System The low level buffer rail has been drilled and fixed on every horizontal providing continuity within the structure and will prevent any further distortion damage. All works carried out at a methodical pace in awareness of person safety.
Craig Blake / Barbara Baynes / Judy Billing Skanska Rashleigh Weatherfoil West Byfleet Surrey KT14 6NG M.O.D. Main Building Whitehall SW1A 2EU Trace source of leak from ladies toilet to external roof area. Inspect roof membrane and gutters. If necessary release a colour dye to assess source of leak. Carry out remedial works using high quality materials supported with product data sheets. All works guaranteed to products documentation.
John Wicks / Paul Creasey Chorus Group Limited Third Floor Finsbury Tower 103 – 105 Bunhill Row London EC1Y 8LR UK Chorus, fourth floor, 75 Davies Street , London W1. Three external elevations on second, third and fourth floors. Remove the adhesive label marks and dust clean 68 glazed window units. Install beige sealants to brick work and grey to powder coated alloy window unit surrounds. Apply grey sealants to existing lead work, a total of 68 window units in three external elevations. These works are to be carried out using Industrial Rope Access complying with the IRATA Guidelines, New Work at Height Regulations and relevant HSE legislation. To create access the minimum requirement for anchorage is a connection that can withstand a 6 kilo Newton direct load (BS 5485), hereafter this will be referred to as safe anchorage. Safe anchorage will be made by using the existing roof cradle tracks and certificated anchor bolts. The working ropes will be connected to bomb proof rigging strops by means of a Karabiner with a minimum breaking load of 22Kn as per CE EN362/EN12275. Each pair of working ropes will have two points of safe anchorage, The working ropes will comprise of low stretch 10.5 or 11mm diameter Kernmantle ropes in pairs and comply with CE EN1891 with a minimum safe working load of 270kg and a breaking load of 2700kg. The abseilers will connect to the pair of working ropes through their harness by means of ascending or descending devices, complying with CE EN567, EN341. Once fully equipped they will step over the parapet wall edge, then abseil to the workface. The working ropes can be deviated by using material slings attached to the fitted roof hand rails creating precise work positioning. A central haulage system will be used to feed materials and equipment to the working technicians. The attendant ground operative will provide this service; he can operate this rope from the roof or ground. The Abseilers will be supervised by an IRATA Level 3 qualified supervisor. The supervisor will communicate with the abseilers via two way radios. If there are structural members or jagged edges these will be protected using rope protecting sleeves, reducing the damage to the ropes. If necessary additional anchorage points will be required, this will be achieved by cables, slings or “cows tails” A cows tail being a short length of dynamic rope complying with CE EN9892 which will be attached to the harness at one end and in a karabiner at the other (Where attached to the anchor point). A complete photographic data report can be provided on completion.
Craig Blake / Barbara Baynes / Judy Billing Skanska Rashleigh Weatherfoil West Byfleet Surrey KT14 6NG M.O.D. Main Building Whitehall SW1A 2EU Mr Gary S Ward now holds a LDN security pass which allows the access team to be unescorted. Ensure each technician is constantly attached to the certificated anchor bolts, or working ropes, install rope protectors where necessary. Re-lamp all 32 external flood lamps. All tools and materials will be placed in GT lock neck material pod bags whilst working at heights. Egress to all occupied rooms have been logistically planned prior to project commencement by Skanska facilities management team. To maximize on productivity and minimize on any disruption to clients the entire project will be policed at all times by each IRATA trained technician. GT shall supply all certifications and insurances on request. Exclusion zones shall be installed on request using hazard signage and warning tape if requested.
Graham Handley (Project Manager) AESA UK Limited 104 Maltings Place 169 Tower Bridge Road London SE1 3LJ Institute Of Cancer Research Paul O’ Gorman Building Huntley Street London WC1 United Kingdom Using industrial rope access equipment and advanced rigging systems connect a Spanish specialist alloy welder to the internal perimeter person rider trolley rail to enable repairs to the interlinking components. Throughout the project a second GT operative shall police ground level if requested install cordons and signage. Carryout a visual and textile examination of work undertaken. GT ROPE ACCESS LIMITED and AESA UK LIMITED have combined there skills and training to complete this project successfully and safely. GT have supplied all certifications and insurances on request. All tools used shall be fastened to the working harness via lanyards. Haulage systems shall be installed and all material objects raised and lowered using tailored slings. GT will contribute skills, equipment and experience to ensure the project is completed safely and efficiently. A complete photographic data report can be provided on completion.
Simon Waring / Mark Crook Shepherd Construction Ltd Westminster House 31-37 Windsor Road Slough SL1 2EL Burlington Danes Imaging Centre Du Cane Road London W12 0TY External water proofing works to glazed link bridge between above address and hospital Install a temporary man safe system using advanced rope access rigging. Fixed anchor bolts shall be load tested to 5Kn prior to project commencement, on completion the anchors removed and holes filled with brick mortar uniformed to brick façade. When attached to man safe systems apply acrypol + roofing system to external GRP roof.
David Willmott / Contracts Manager Jarvis Accommodation Limited Meridian House The Crescent York YO24 1AW Provide detailed surveys and reports assisting with internal and external access methods for the cleaning contract of Whittington Hospital Highgate Hill London N19 5NF building.
NDM Lead Sheet Specialists Paul Flynn Metallum House 3 Innovation Park Manor Farm Road Middlesex HA0 1XE Project 240 Regent Street, London WC1 Installation of fall arrest netting on variouse roof elevations. To supply and install 5mm diameter high tenacity polypropylene, 45mm squared knotless mesh nets, with a 11mm kermantled rope perimeter. This will be suspended from the steel beams with steel cable strops and supporting steel cables (where necessary), at two metre intervals. The netting is UV treated and does not absorb water, it also has a high resistance to alkaline and acid. Note: Should the netting be subjected to a dynamic fall, it must be replaced – the net tightens and the twine become damaged. The above work will be carried out using industrial rope access complying with the IRATA guidelines, subsequent British standard and relevant HSE legislation. The costs below include all rigging and access equipment, skilled and qualified labour, tools, rope access personal protective equipment, etc to carry out a comprehensive completion of the work.
Craig Blake / Barbara Baynes / Judy Billing Skanska Rashleigh Weatherfoil West Byfleet Surrey KT14 6NG UK M O D main building Whitehall SW1A 2EU Internal atria works level eight spine 2 C Embankment side. Create access to banner catenarie wires obstructing beam detectors, deviate obstructing cable with five meter steel cable extension fitted with pipe grips and adjustable barrel strainer. Re-align beam detectors under the supervision of Andrew Apia, on completion aid climb into house cradle and descend to allocated parking zone.
Craig Blake / Barbara Baynes / Judy Billing Skanska Rashleigh Weatherfoil West Byfleet Surrey KT14 6NG UK M O D Old War Office Horseguards Avenue Whitehall London SW1A 2EU Main security entrance to court yard. To access agreed areas using aid climbing techniques. Create a rope access haulage system to raise Youngman’s decking boards and a six meter alloy tower erected and supported by out rigging rope systems. The work platform will ensure work positioning to replace, re-lamp and commission overhead lighting and roof top flood lights. SRW will supply an electrician to supervise the project, provide all tools, materials and assist where necessary.
Mr Robert Lloyd Doveguard Construction Limited 9-13 Cow Cross Street Farringdon London EC1 6DR UK 9-13 Cow Cross Street Farringdon London EC1 6DR UK External Masonry and Timber Refurbishment Project Grade 2 Listed Building All Elevations Restore all single timber sash window frames with twelve panes. Power wash external brick reveals and stone window sill to remove dirt and traffic film. Remove and re point any loose or missing mortar joints. Brickwork reveals to be coated with a water proof product. Apply low modular sealant to the perimeter of each window frame to brickwork junction. Providing the timber is not rotten and repairs are not necessary the unit shall be rubbed down using a cordless sander, a coat of primer and coat of gloss applied (all paint applications shall adhere to the product data sheets provided). Below the horizontal pipe work / guttering install on a mortar bed and install two stone air grills to uniform with existing brick façade. Remove grey plastic ventilation pipes and re brick. Replace missing brickwork and uniform mortar. Remove lead flashing imbedded in brickwork over guttering head.	Doveguard
Skanska Build UK M O D Head Office Whitehall, London SW1A 2EU The Old War Office Whitehall Maintenance of Line and Netting System There are three Uni-line horizontal flexible permanent cable systems which span the well area in order to provide access to inspect and maintain the fall arrest netting. There are also roller carts, attachment linkage and suspension lanyards / rope which must be held on site for use as part of this system. Cableway Safety Systems To inspect and test each cable way system by disassembling the toggle swage ends and individually testing the bolts to the end anchors, and then carrying out a safe working load test on the cable swage end of 15 KN as per the legislation. The total end loading capability will be calculated and recorded on the system tag. On completion of the test, each system will be marked and logged on our paperwork; and a disc documenting the systems user number, safe-working load, etc, will be secured to each individual system.
Simon Waring / Mark Crook Shepherd Construction Ltd Westminster House 31-37 Windsor Road Slough SL1 2EL Burlington Danes Imaging Centre Du Cane Road London W12 0TY Carryout advanced rigging to the internal atria cylinder steel work, install four tram ways at height using fabric turfers, material chocked slings and various descender devises. When safe access if installed the four elevations can be re-lamped. Ground level must be policed and cordened off displaying work at heights signage. Carryout inspection, repairs and paint applications to South Facade external steel work fabrications level six to level one. Using rope access skills create access to all damaged paint work identified and photographed and agreed with Simon Wearing of Shepherds Construction. Repairs to be rubbed flat a base coat steel primer applied and a final top coat applied, all applications to be of a high standard and uniformed.
Simon Waring / Mark Crook Shepherd Construction Ltd Westminster House 31-37 Windsor Road Slough SL1 2EL Burlington Danes Imaging Centre Du Cane Road London W12 0TY Create rope access within internal atria main entrance, clean and paint all horizontal cylinder steel beams. Project to be policed and appropriate signage and barriers in place. All finished surfaces to be protected with cortex and dust sheets. Paintwork to be completed to high standard, supervised and inspected by Shepherds Construction Limited.
Mr Pat O’ Conner Stonewest Limited Lamberts Place St James road Croydon CR9 2HX UK 14 Cornhill London EC1 UK Various Elevations Create access using advanced industrial rope access rigging from any two structural points. Install anchorage eye bolts if required, to deviate working ropes into precise work positioning. Rope protectors shall be installed to prevent friction to masonry or metal edges. Install corking and sealants to joints between stone clad pre cast units, tool finish and uniform to remaining sealants.
Mr Richard Bellamy Bellfort Services Limited 79 Long Acre Covent Garden London WC2 9NG Holborn Bloomsbury Square W1 External Restoration of Masonry and Timber Restore timber sash window frames. Power wash external brick reveals and stone window sills to remove dirt and traffic film. Remove and re point any loose or missing mortar joints. Concrete reveals to be coated with a water proof product. Apply low modular sealant to the perimeter of each window frame to brickwork junction. Restore vertical cast iron drain pipes guttering and hoppers and decorate with a base primer and a final gloss coat. (All paint applications shall adhere to the product data sheets provided). Uniform works to a high standard.
Craig Blake / Barbara Baynes / Judy Billing Skanska Rashleigh Weatherfoil West Byfleet Surrey KT14 6NG UK M O D main building Whitehall London SW1A 2EU External Spine Two Section C Lamp 16 Embankment Side. Construct a rope access latch way system to allow safe access onto the parapet ledge. Ensure external flood lamps are disconnected from power source, remove bracket and lamp and re-fit new replacement unit. Test new installation under the supervision of a SRW engineer.
Allanna Anne Flat / Managing Director Innovation Property Services Limited 54 Marmion Close Chingford London E4 8EW UK Project Excel Building 1 Western Avenue Royal Victoria Dock London E16 1XL Roof Top West and East Elevations. Commission EXCEL illuminated signage. Create a temporary rope access latch way system to access work zones. When positioned at the zone ensure each rope technician is constantly attached to two structural points via material slings and lanyards fitted to the working harness. Remove and refit each external lamp access panel using zinc plated self-tap screws supplied by IPS Limited. Each panel shall have a minimum of four secure fixings. A CCJ is in the process of being issued to I P S Limited
Allana Anne Flatt / Director Innovation Property Services Limited 54 Marmion Close Chingford London E4 8EW UK Excel Building 1 Western Avenue Royal Victoria Dock London E16 1XL Re Lamp Four Aircraft Warning Light. Install a temporary rope access latch way system to allow safe access to the work zone. Aid climb each thirty meter tall steel cylinder spansion and re-lamp with ES100 lamps. A CCJ is in the process of being issued to I P S Limited
Graham Handley (Project Manager) AESA UK Limited 104 Maltings Place 169 Tower Bridge Road London SE1 3LJ Radisson SAS Hotel Stansted Airport United Kingdom Using industrial rope access equipment and advanced rigging systems carryout load tests to wine tower winches systems, in house person rider systems and external ladder system. NOTE – Internal perimeter rider system tested with 320 KG Wine tower winches tested with 240KG External access ladder system tested with 340 KG
Allana Anne Flatt / Director Innovation Property Services Limited 54 Marmion Close Chingford London E4 8EW UK Excel Building 1 Western Avenue Royal Victoria Dock London E16 1XL Roof Top West Elevation EXCEL sign. Remove and re lamp each florescent lamp within the external EXCEL signage. Clear all foliage and debris from each open unit and secure access covers. A CCJ is in the process of being issued to I P S Limited
Craig Blake / Barbara Baynes / Judy Billing Skanska Rashleigh Weatherfoil West Byfleet Surrey KT14 6NG UK M O D main building Whitehall SW1A 2EU Level Ten External Spine One Gulleys Level Ten External Spine Three Section C Embankment Side Gulleys. Clear gulleys above the leak report locations using industrial rope access.
Simon Waring / Mark Crook Shepherd Construction Ltd Westminster House 31-37 Windsor Road Slough SL1 2EL Burlington Danes Imaging Centre Du Cane Road London W12 0TY Internal painting applications works to main entrance mode steel works.
Lee Barnes 8 Build Limited 8 Token House Yard London EC2R 7AS Society General Building 41 Tower Hill London EC3 4SG Create a weatherproof seal between building faced and external air conditioning flumes using sealants and flash band.
Frank Tewes The Rezidor Hotel Group S.A Avenue du Bourget 44 B-1130 Brussels Belgium Park Inn Hotel St Marys Street Bedford Bedfordshire MK42 0AR United Kingdom External renovations to front, rear, Duck Mill Lane and Riverside Elevations. Provide a quotation to repair concrete external panels and install sealants. Reviewing the concrete inspection summary and its findings it is possible to create a programmed system of remedial works. • Manually cut out and remove the weathered sealant and foam backing strips • Damaged horizontal and vertical joints to be reformed using a proprietary repair material • Where spalling is evident the reinforcement bars will be exposed by at least 25mm of all corrosion, needle gunned back to bright using a hilti 104 percussion chisel, treated with a corrosion proof coating and the surrounding area plugged and reformed with a BBA approved proprietary two part system cementations repair material called Rona bond HB40 mortar mix and HB40 primer. • The BAA approved Rona bond repair product is supported with an insurance backed guarantee. • Plugs which cover pre-cast panel anchor points are generally loose or missing as noted these need to be replaced. • The top roof has a stone chip render coating which been hammer tested to expose extreme movement and cracking, repairs will be made and catalogued. • All repaired concrete panels to be coated with PVA concrete slurry and uniformed with the existing façade. • Install and recess new Arbo 30mm diameter foam packing strips between each panel • Apply Arbo 2650 primer to concrete joints ensure surface is dry and dust free allow 24 hours to dry before installing sealants • Gun Arbosil11090 neutral cure low modular colour black sealants 10mm deep, tool finish and uniform throughout • Arbosil 1090 is the recommended sealant for use with concrete panels it provides more movement and life span than Arbosil LM • Pre-cast panel joints vary from 12mm to 35mm • The average joint width shall be assumed to be 20mm wide • A 380ml sealant cartridge will cover 1.7 metres gunned 10mm deep beads • A list of quality products will be provided supported with manufacturer’s data sheets, explaining application details and COSHH requirements. • All refurbishment work will be guaranteed with reference to the material data.
Alan Gredley / Construction Manager Mike Evans / Financial Manager 8 Build Limited 8 Token House Yard London EC2R 7AS 39-40 Botolph Lane London EC3R 8DE North Elevation to Botolph Alley and West Elevation to Botolph Lane. Level one to six. External Renovation works to masonry, lead dormers, casement windows, box guttering, fascias and carry out a complete build clean.
Phil Rubery Omega Red Group Limited Unit 10 Prospect Way Hutton Industrial Estate Brentwood Essex CM13 1XA UK Project 44–48 Brook Street London W1 to corner of Davis Street W1 Set up advanced rigging systems for GT technicians to access all the agreed installation areas. Install lightning tapes as advised by an on site Omega Supervisor.
Cliff Logan / Venue & Estates Services Manager Annette Mc Kenzie / Building Service Coordinator Excel London One Western Gateway Royal Victoria Dock London E16 1XL UK Project:- Excel London One Western Gateway Royal Victoria Dock London E16 1XL Supply four complete fall arrest harnesses, PPE packages and carry out a working at heights briefing, high light danger zones and fall factors. Set up advanced rigging systems where latch way systems are not installed and escort Sir Robert Mc Alpine clients to the required zones at roof top.
Jim Kitson / Senior Project Manager Current Development Limited Interior Services Group PLC Aldgate House 33 Aldgate High Street London EC3N 1AG UK Project:- 32 Duke Court London SW1 Remove redundant air conditioning pipe work and brackets from roof top.
Stephen Jevons / Managing Surveyor Morgan Lovell PLC 16 Noel Street London W1F 8DA UK Project:- 210 New Kings Road Putney London SW6 4NZ All elevations eight level building Install sealant applications to window heads creating a weather proof seal.
Darren Bone / Contracts Co-ordinator Environmental Management Solutions Services Limited Global House Geddings Road Hoddesdon Hertfordshire EN11 0NT Project:- Crystal Palace National Sports Centre Ledrington Road London SE19 2BB ASBESTOS REMAL North and South internal supply ducts Duct work dimensions 23 metres high, 3 metres wide and 1.2 metres depth. Structural rigging points at internal roof level descending to sub basement / mezzanine level. • EMS Group limited to provide responsible personnel operatives to assist throughout this project. • GT Rope Access technicians to receive full asbestos ARCA training provided by EMS Group limited. • All provisions to be in place to protect everyone against risks to health or safety arising from activities at work; and submit proposals for new or revised regulations and approved codes of practice • Project to adhere to HSE, HSC, Statutory Instrument 2006 No. 2739 The Control of Asbestos Regulations 2006, L.O.L.E.R. and I.R.A.T.A. regulations • All tools, materials and equipment to be supplied by EMS Group Ltd. • On completion all rope access equipment to be removed and disposed of. New harnesses, ropes, slings, cow tails, lanyards, rope protectors, pod bags and PPE to be replaced by EMS Group Ltd. • Removable task lighting to be in place within each shaft. • For each duct rigg two sets of working ropes from structural steel work within internal roof. • Install rope protectors and roller plates to reduce any friction and damage to working ropes and climbing equipment. • Install an additional haulage line to enable the vacuum system to be lowered within each shaft. This system will be operated by G T Rope Access technician based at the entrance point of each duct and using two way radios communicating with the two rope technicians. • Should a final internal inspection be required by EMS Group the G T Rope Access team can provide a half day training program and escort that person in a controlled decent through each or all shafts.. • A complete photographic data report can be provided on completion. • Any additional works can be added as variations and carried out as agreed upon.

Interior Services Group PLC John Bray / Project Director Terry Byatt / On Site Contact Aldgate House 33 Aldgate High Street London EC3N 1AG UK Project:- 14 Cornhill, London, EC1 UK. Carryout sealant applications, re-point stonework and remove blockage to box section guttering using pipe extensions and a wet vacuum.
Pat Coffey Advance Cleaning Services Limited 39 Gorse Ride North Finchamstead Wokingham Berkshire RG40 4ES Hire out four one ton elephant push travel trolleys to assist in an internal atria clean. Terms and conditions apply as agreed.
Mr Giovanni Florentino / Property Owner / Building Developer Waterman’s Quay William Morris Way London SW6 Project at the above address Commission a purpose built glass atria suspended over the River Thames on the ninth floor Brief program of work 1. Using cordless hand tools remove / inspect alloy capping plates and pressure plates 2. Label each item and place in suitable temporary storage 3. Rake out existing sealants 4. Glass unit to remain in place 5. Conservatory frame work surfaces and glass shall be cleaned and new sealants applied as stated in Arbo product data sheet any variations arbo technical department shall advise 6. Pressure cover plates and external cappings shall be re-fitted 7. A final inspection and water test shall be carried out 8. Prior to completion a professional external glass clean shall be provided 9. Equipment to be de-rigged and removed 10. A temporary weatherproof shield will be provided and installed should we incur any unforeseen weather conditions during the above procedure 11. Works may have to be re scheduled due to weather conditions or breakages
Patrick Fairman Omega Red Group Limited Unit 10 Prospect Way Hutton Industrial Estate Brentwood Essex CM13 1XA UK Project The Exchange Charles Street Croydon Surrey Assemble portable alloy roof riggs on roof top to access and install all lightning tapes to ground level.
Cliff Logan / Venue & Estates Services Manager Annette Mc Kenzie / Building Service Coordinator Excel London One Western Gateway Royal Victoria Dock London E16 1XL UK Project Excel London One Western Gateway Royal Victoria Dock London E16 1XL Provide working at heights training for a minimum of four men and a maximum of eight venue engineers. • supply fall arrest harnesses • suitability of equipment • inspection of PPE • fall factors • fall arrest • work-restraint • work positioning • practical usage of on-site specific system • personalised certification and work manuals issued on completion
Charles Cooper Eye Pro Limited Hollywood House 76 Hollywood Lane Rochester Kent ME3 8AR Project Carisbrooke Court 63-65 Weymouth Street London W1 All elevations as schedule of works Create and connect to latch way systems before accessing roof top. Set up advanced rigging and pulley systems for GT technicians. Create access with the use of three alloy roof riggs each backed up to tested anchor bolts. Carryout masonry, timber and lead restoration.
Interior Services Group PLC John Bray / Project Director Steve Baker/ On Site Tech Services Manager Aldgate House 33 Aldgate High Street London EC3N 1AG UK Payment to be made by; Accounts Kalpesh Patel J.Coffey Construction Limited, 93 – 95 Greenford Road Harrow Middlesex HA1 3QF Project One Finsbury Circus London EC1 UK. Install electrical systems to operate internal riser louvers. Levels 1 - 8. Assisted by • James Cooke of Mitie Engineering Services Limited • Ben of HSC Candela Limited

Back to Top

Copyright © 2007 GT Rope Access Limited. Last modified: May 18, 2008

Copyright © 2007 GT Rope Access Limited.
Last modified: May 18, 2008